ISO 9001: 2008 Certified Company
About Innovative           |           Products           |           Clients           |          Enquiry          |           Contact Us


Laryngoscopes

 

High Pressure Rectangular & Cylindrical Horizontal Autoclave

Construction
Triple walled with steam jacket and separate boiler. Inner chamber and steam jacket are made our of Heavy gauge S.S. sheet with leak proof argon welding.The Autoclave has single piece door made of stainless steel. Back plate and rising is also made of thick stainless steel sheet. All the Autoclaves are hydraulically tested to withstanding 2.5 times the working pressure. Mounted on tubular steel frame with ground leveling screwed flanges. The Outer jacket is wrapped with asbestos sheet or glass wool to minimize the heat losses due to radiation and is covered by polished stainless steel for the elegant appearance.

Steam Generator
Made of heavy stainless steel sheet. Heavy ring mounted in front of the boiler with folding thick stainless steel plate fitted with heating elements and low water level cutoff device to protect the former from burning out dry. Front folding plate system provides for easy cleaning of the deposited scale on the elements and the walls forlong life and efficiency. Fitted with water gauge glass for water level indication, water inlet and outlet valves.

Pressure Control

The pressure control device is incorporated in all electrically operated sterilizers. It economics on power consumption and reduces the frequent opening of the steam release valve and prevents the release of steam in the room, it cuts off the power supply to heaters when the set pressure is achieved an re-energises the heating when the set pressure is achieved and re-energises the heating elements when pressure falls below the set point.

Heating Elements
Flanged type/ immersion heating element are made of high grade material Operating Temp. & Pressure Sterilizing temp : 121" Sterilizing pressure : 1.2o 1.5 kg/cm2 (15 psi to 22 psi) Power Requirement : Suitable to operate on 440V volts, 3ph,50Hz/Ac supply

Autoclave Available in following capacities :

Item Code

Size

Capacity

1041 A

16" X 24" (400 X 600 mm)

80 Ltr

1041 B

18" X 36" (450 X 900 mm)

150 Ltr

1041 C

20" X 36" (500 X 900 mm)

185 Ltr

1041 D

24" X 48" (600 X 1200 mm)

365 Ltr


Vertical High Pressure Automatic Autoclave With Radial Locking System

INNOVATIVE Vertical Autoclave with (Radial Locking System) automatic controls and safeguards to manage daily sterilization in the Hospitals and Clinics. INNOVATIVE Vertical Autoclave made out of total medical grade stainless steel (16Gauge) and all part also made of S.S. and top lid is die pressed 6mm tick solid S.S. plate and polished for the elegant appearance. This Autoclave is equipment with Radial Locking System as well as low water level cut off system. When water level fall down the equipments automatically gets cut power supply to protect the elements to burning out dry fitted with water gauge glass for water level indication, water inlet and outlet values. The Vertical Autoclave has pressure control device incorporated. It economics on power consumption it cuts off the power supply to heaters when the pressure is achieved at 20psi and re-energies he heating elements when pressure falls below the set point. The Vertical Autoclave front panel is provided with working pilot lamps, pressure gauge and timer for sterilizing, switch for selection process and sterilization and two Alarm buzzer one for the finished the process

Vertical Autoclave Available in following capacities :

Item Code

Size

Capacity

1044 A

12" X 20" (300 X 500 mm)

37 Ltr

1044 B

16" X 24" (400 X 600 mm)

80 Ltr

1044 C

18" X 36" (450 X 900 mm)

150 Ltr

   

Next

 
Home   |   About Us   |   Contact Us
Design & Developed by : Webisoft Technologies